Setup Range Extender

Linksys Extender Settings

Linksys Extender setup Linksys extender login
  • Plug your Linksys Extender.
  • Connect to Linksys Network.
  • Open in your browser.
  • Follow the instruction to complete the setup.
  • Use WPS method.
  • Press WPS on your router for 3 seconds.
  • Press WPS on your Linksys range extender.
  • Wait for 20-30 seconds.
  • Now connect to Linksys extender network.
  • You need to be connected to Linksys extender.
  • Once connected to its wireless.
  • Open browser and type
  • Login screen will appear.
  • Use default login.(admin)
  • Use ethernet cable to access linksys extender setup or login page.
  • Connect an ethernet from linksys extender to your computer.
  • Now you can also try to access the extender page.


Troubleshoot Linksys Extender

Cannot connect to Linksys range extender or login in

  • Using WPS in such situation is the best option.
  • Press WPS on the router for 5 seconds.
  • Press the button on the extender also.
  • Wireless LED will be Solid green. It means you are connected to host network.

Can we use Ethernet for extender.linksys setup or linksys extender login?

Yes, you need to use Ethernet cable from linksys extender to your router LAN port.

  • Once connected open your browser and type in or
  • It will redirect you to linksys extender login page.
  • Use admin for both username and password.

How to login when extender.linksys is not working?

Using linksys extender default IP address you can login in it. To check the IP address of linksys you need to be connected to it somehow. Using ethernet or wirelessly. Now open command prompt and type in Ipconfig and enter. Check the default gateway and use that same IP address to login in linksys extender login page.

What is the default extender.linksys login?

Linksys extender can be login using admin or password as both could be the default login. It depends on the model you are using.

What should I do when linksys extender is not showing up?

If you are not able to see the linksys extender wireless then you need to power cycle it first.  Once the all the LED is on then hold the reset button for 10 seconds and then release it. Wait for 5 minutes and then check you see the linksys extender setup name.