How to perform the Linksys RE6400 Setup?
The Linksys RE6400 setup was designed to remove dead zones and increase WiFi signals throughout the house. It’s additionally designed to work with all WiFi routers. If you plan to set the wireless settings on the extender and also avail of its services, you’ll need first to set it up. Check out this blog if you are interested in learning more about setting it up.Before starting, make sure that you’ve completed below:
- Firstly, a working 2.4GHz and 5GHz wireless connection.
- It is the WiFi setting of your router, including the password security key and the WiFi names (SSID).
- The Linksys RE6400 to an outlet for power. Then wait for the light to go and the orange colour to shift.
- Connect your computer or mobile device with it using Linksys RE6400’s default WiFi address, Linksys ExtenderSetup-xxx.
Setup Process For Linksys RE6400
- Firstly, open any compatible browser on your computer or mobile device, enter http://extender.linksys.com or 192.168.1.1 in the address bar, and press launch the setup.
- Click on Start Setup.
- After you’ve created an admin password, type in your password hint, then select Save.
- Select Next after choosing “As a wireless range extender.”
- When asked, choose the current WiFi network and then enter your password. If you are connected to dual-band networks, you’ll be able to see the SSIDs for both bands.
- Select Manually enter The Network’s Name and Password if you have a hidden SSID. Please wait till the WiFi is recognized, and then click it.
- Make the extended network SSID together with your wireless username.
- Only the range extender mode will show the spot Finder page. This feature will determine the strength of the signal from the router and the range extender.
- Lastly, the device will scan for the latest firmware and automatically update it.
This Setup procedure is now complete in Range extender mode.The top of the header on the Linksys RE6400 running in range extender mode will show Dualband Wireless Range Extension. You can see the latest top header’s name after accessing the configuration page after completing the installation.
Accessing the web-based setup page
- Firstly, Linksys Wireless AC and Wireless AX Range Extenders let you extend the WiFi coverage to remote areas of your home. Before you begin, make sure that your computer or device has been connected to the extender’s WiFi.
- Make use of any browser that is compatible.
- Three methods to access the web-based configuration page are accessible:
- Enter extender.linksys.com in your browser.
- If you are using Windows and Android to access the web, type http://modelxxx in your web browser. Also, you can type http://modelxxx for Android. http://modelxxx to access iOS and macOS. Enter the model number and 3 characters of the IP address of the range extender when employing this technique. You’ll need to enter the name you have chosen if you are changing the address of the extender.
- Input the address for the range extender’s IP. If your range extender is unable to detect the DHCP host, its default IP is 192.168.1.1. It is necessary to locate your range extender’s IP address and the range extender on your router’s DHCP client table. Suppose you’re having difficulty getting access to the setup page for browsers of your extender. If that happens, you could reset it back to factory settings.
- Lastly, a password is required. Ensure you enter your new password if you’ve previously altered your password. If you don’t have an administrator account, enter admin into the Password box and click Login.
How To Reset Linksys RE6400
Navigating to the range extender’s online configuration page by using the web browser is possible. But, Access Point mode may not allow access to specific options because of the layout and functions with access points. It is necessary to reconfigure the range extender after you reset it. Then, reset your Linksys range extender to the factory default settings
A reset on your Linksys range extender can restore it to its factory default settings. If you encounter one of the following issues, you must restart to reset the Linksys Range extender.
- Intermittent connections can be experienced when using this range extender.
- If you fail to install the setup program, it is necessary to install the range extender manually.
- The setup page on the internet for the range extender isn’t accessible. When a power cycle is completed, the light of the range extender doesn’t flash or stay unmoving after it has been powered on.
Hard Reset
Then, reset the Linksys range extender to the factory default settings. You can back up your device’s settings. This will let you reset the settings without going through the entire setting up once more. The model of your range extender and the position of the reset button can differ. Press the reset button on the range extender for 8 seconds. For the reset to be complete, then power cycle the device.
Conclusion
Contact our experts at the final if you’d like to learn about the Linksys RE6400 setup. Feel free to get in touch with our team at the toll-free number. You can also visit the website for the same and gain more information on this.
