Linksys AC2200 Extender setup
The AC2200 Extender replicates the WiFi signal from the router, making connectivity possible in difficult-to-reach areas. You can access the web management page for the set-up and configuration of the Linksys AC2200 Extender Setup. This article will provide insight into the login and set-up process.
Installation of range extender
- Firstly, connect the range extender between the router’s dead zone or weak area. The set-up software helps you locate the exact location.
- Wait until the solid light is visible on the cover of your range extender.
- If the set-up fails to start automatically, you can enter the web address extender.linksys.com.
Setup using Wi-Fi-protected set-up
The WiFi-protected set-up makes it easier to connect the extender and network. It also helps you connect other devices to your network via the extender. The router should support the wifi-protected set-up. Follow these instructions to connect to the WPS button.
For at least 1 second, push the WPS button on your extender. You can repeat the process for dual-band routers to extend the second network.
Setup using the wifi-protected pin
Use this method if the administrator has a wifi-protected set-up menu. For the rest, follow these steps.
- Enter the extender pin in the appropriate area on the router’s WPS screen. Click Register. Once the connection has been established, the WPS set-up light should remain solid for 10 seconds.
- To complete the process, click OK.
Setting the Extender in the range extender mode
Ensure that the following steps have been followed before setup.
- Firstly, a stable internet connection
- The WiFi password/security code and the WiFi name SSID.
- Plug the range extender into the power outlet. Before the set-up process begins, wait until the light turns orange.
Setting the extender in the range extender mode
- Use the computer or mobile device to connect the device with the SSID of the range extender.
- Input the web address extender.linksys.com or the default IP address 192.168.1.1 in the address bar.
- When the set-up wizard opens, click the Start Setup option.
- By default, the ‘As wireless range extender’ option is selected.
- Now, choose the WiFi network.
- Enter your WiFi password and click the enter key. Click Next to configure the extended wireless network.
- Use the spot finder to locate the router’s position.
- To secure your access, you can create an admin password.
- Lastly, once the extender set-up is complete, you will receive the message.
Set up via browser-based configuration
Use this method if your router doesn’t have a WPS option, or you don’t want the WPS button.
- Firstly, plug the range extender between the router and the dead WiFi area.
- It may take some time for the orange light at the top of the range extender to turn on.
- Connect to the range extender network now.
- Launch the set-up wizard using the web address extender.linksys.com or the default IP address. Follow the on-screen instructions.
- Lastly, connect your devices to the extended network that you have created.
Setting the range extender via the wired connection
The set-up CD included with the device allows you to manually set up the range extender.
Verify the WiFi settings of your wireless router. For smooth operation, the router and extender settings must match each other. But first, identify the WiFi (name, channel, security mode, and password).
Connect the computer and the range extender
You can connect the range extender with the computer using an ethernet cable. This will allow you to access the web-based configuration page. Follow these steps to configure the wireless settings of the range extender.
- Firstly, open any compatible browser.
- In the address bar, enter the 192.168.1.1 IP address or the default URL.
- In the required field, enter the password.
- Click on the Wireless option. Next, select the Basic wireless settings option.
- After the configuration view section opens, click on the manual radio button. Next, enter the router’s IP address.
- The wireless security section will show you the security mode that the router uses.
- After selecting security mode, enter the password for WiFi.
- Lastly, click on the Save Settings option to complete the set-up process.
You can access the web management page to configure advanced features of the Linksys extension. Log in before proceeding.
For non-configured extender
- Connect your laptop/computer to the range extender’s Ethernet port.
- Lastly, plug the range extender into the power outlet. The indicator light will turn on slowly.
- Use any web browser to enter the default IP address and the web address.
- Enter your username first and then the password. Click ok to fill in the fields.
Conclusion
If you want to get more information on the Linksys AC2200 extender setup, feel free to get in touch with our experts. You can directly call them on the toll-free number and have a chat with them. They will give you a bit of expert advice.
